RF Analyser Kit HFW59D plus

Fully compensated up to 10 GHz, incl. preamplifier and omni antenna

HFW59D in its PLUS configuration to supplement the basic building biology equipment for the upper frequency range up to 10 GHz: Especially for the analysis of the two WLAN/WiFi bands, the recently auctioned 5G band and, of course, radar between 8.5 and 9.5 GHz. This device has also been tailored to the building biology needs, and has found rapid worldwide distribution in building biology professional associations since its market launch a few years ago.

Available immediately
Delivery time: 16 - 18 Workdays (Other countries)

More than 5,000 satisfied customers

1.877,05 €

incl. 19% VAT , plus

Gigahertz Solutions GmbH

SKU: 930-328

GTIN: 4039009930328

Category: Measurement

Worldwide unmatched sensitivity at 10 GHz combined with the proven analysis capabilities of the Gigahertz professional equipment

In addition to the LogPer antenna included in the standard scope of the device, it also includes the 360° omni antenna as a basis for long-term recordings and particularly advantageous for identifying radar loads at unknown transmitter locations.
The HV20_2400G10 preamplifier achieves a sensitivity of 0.01 µW/m² display resolution over the TOTAL frequency range up to 10 GHz.
Otherwise, the specification is similar to the HFW59D in the basic configuration:
FULL 10 GHz, fully compensated. This unique broadband HF meter allows unfalsified measurements of the frequently used radar frequencies between 8.5 and 9.5 GHz (air traffic control, navigation radar, military radar, weather radar, traffic control). Maximum VBW to display shortest radar pulses (< 0.5 µs).
Integrated steep high pass filter at 2.4 GHz reliably suppresses the often dominant GSM and DECT frequencies, thus allowing unfalsified measurements of WLAN/WiFi and the upper area relevant 5G frequency range at 3.4 to 3.8 GHz.
Includes an especially designed log-per antenna with excellent directional characteristics.
Optimized Peak Hold function with particularly fast response speed due to patented circuitry.
1 µW/m² display resolution (for higher sensitivity, e.g. for minimal wireless LAN signals, use the optional preamplifier HV20_2400G10).
Calibrated AC measurement output for the demodulated signal, scalable DC output, for instance for the connection to an NFA for long-term recordings.
Quantitative differentiation of pulsed <> unpulsed radiation according to the building biology recommendations.
The meter is particularly designed for the measurement of peak values of modulated signals ("pulse"-mode).
NiMH battery pack, charge control and power supply unit help avoid unnecessary battery wear.
Delivered in a plastic case K2 with convoluted foam filler for a safe transportation of all components.

All common advantages of the Gigahertz broadband measurement technology are also reliably fulfilled in the upper frequency range

It is fully frequency compensated, i.e. no frequency range is overrated, underrated or even ignored.
In addition, our measurement technology always shows the SUM of ALL existing radiation at the place of measurement, not only the strongest signal, as is the case with the cheap - allegedly - very broadband detectors that have been launched on the market in recent years.
The two features mentioned above are extremely important for a meaningful measurement and technically very difficult to implement. This is also the reason for the unique position of our instruments in their respective price class.
All of this happens continuously in real time - thus a meaningful measurement is possible considerably faster than with a spectrum analyzer, yet another advantage with regard to far more expensive and complicated measurement technology.
The measured values are displayed reliably and directly in the unit of the building biology precautionary values - without any calculations being necessary.
The HF-Analysers are equipped with a fully-fledged log.-per. antenna. This clearly sets them apart technologically from compact pocket devices without an external antenna. The log.-per antennas of the devices allow users to detect and measure even hidden sources of high frequency electromagnetic radiation (HF). The measurement can take place both indoors and outdoors (protect the meter from moisture!).
With the audio analysis it is possible to distinguish most radiation sources, such as mobile phones, WiFi, DECT, radar, etc., even without electronic expertise. Simply by listening and comparing with the offered sound samples.
Detailed measuring instructions with limiting values allow a reliable evaluation of the personal exposure - even without technical expertise.
Last but not least: Many patents have been granted to us, the devices have ten thousandfold proven their reliability, and have shown to be leading-edge in their price categories.

Item weight:	1,65 kg
Frequency range:	2.4 GHz - 10 GHz
Measurement range:	Power flux density: 0.01 - 19,990 µW/m² (with preamplifier HV20_2400G10, included in delivery)
Precision:	Basic accuracy including linearity error: +/- 3 dB Zero point deviation and special digitizing error ("rollover"): +/- 5 digits
Sensor:	Patented, compensated LogPer measuring antenna with very good directional characteristic
Audio analysis:	Modulation frequency and field strength proportional audio signal supports identification of pulsed radiation sources (WLAN, WiFi, radar, etc.) and detection of elevated exposures.
Signal rating:	Peak value and average value display of the modulated signal component (corresponds to the total signal in practice). For evaluation of crest factors, observe instructions. No measurement of CW (test) signals.
Signal output ports:	AC (demodulated signal, calibrated), and scalable DC-output.
Power supply:	9.6 Volt high quality NiMH battery pack (included), average operating time: 7-8 hours Low-Batt indication on Display Auto-Power-Off function (deactivated during longterm measurements) Power supply unit (included)
Garantie:	2 years
canonical_eng: