Service specific frequency filter FF10

For an exact analysis of the major radio services in Europe (including the three LTE frequencies as well as TETRA).

More than 5,000 satisfied customers

997,10 €

incl. 19% VAT , plus

Hersteller unbekannt

pcs

SKU: 531-082

GTIN: 4039009531082

Category: Accessories

Unmatched: The 40-60 dB suppression of unwanted frequencies as well as the 20-30 dB suppression for the technically very difficult separation between GSM/LTE1800 and DECT.
To be connected between the antenna cable and the antenna entry (by the operator).
Touch switches for filter selection.
Power supply through the HF analyser where possible and/or a battery placed in attachable battery box.
Cascadable with the pre-amplifier HV10 and the attenuator DG20_G10.
No additional insertion loss to be feared during broadband measurements, so the filter can remain attached to the meter.
Perfectly shielded against interfering radiation.
For a use of the FF10 filter with your HF analyser, the analyser requires a small modification which will be carried out free of charge in our factory. Details on the procedure will be forwarded to you automatically upon receipt of your order, or upon demand also prior to your order.

Item weight:	0,30 kg
Scope of delivery:	Frequency filter Battery case 9V alkaline manganese block battery Semiflex cable connection Untwisting tools Instruction manual
Power supply:	Used with HFE, HFW and HF5xxx types: Remotely powered via battery/power supply of the HF analyzer. Its runtime is reduced to about half. No runtime reduction with external 9V block (mandatory for HF32D, HF35C and HF38B).
Garantie:	2 years